dynaCERT Collaboration with Northwest Territory Power
Corp.
TORONTO,
May 11, 2017 (GLOBE NEWSWIRE) -- dynaCERT
Inc. (TSX-V:DYA) (OTCQB:DYFSF) ("dynaCERT"
or the "Company") is pleased to announce the collaboration with the
NTPC (Northwest Territory Power Corp. in Yellowknife, NT) in a fuel savings and
emission reduction pilot project located in Deline, NT. Deline is located on
the southwest shore of Great Bear Lake, about 400 km northwest of Yellowknife.
Deline is only serviced via aircraft and winter ice roads. The NTPC operates
3,500 diesel power generation units in remote villages and communities across
the Territory.
The dynaCERT-NTCP project, at this important
initial stage, consists of the sale, installation and commissioning of four dynaCERT HG1 units onto three stationary
generator units that in turn are responsible for producing all of the
electricity in the village of Deline. One stationary generator unit will have
two HG1 units. The NTPC engineering team has worked closely with the dynaCERT engineers to design this
specific application for the community to align with NTPC’s stated goal of
reducing their reliance on fossil fuels.
Robert Maier, COO of dynaCERT, states, “NTPC continues to
work hard at the leading technological edge
to
improve the lives of the people they serve. We are pleased that our HydraGENTM
technology is part of this pilot project opportunity to lower operating costs
for NTPC and improve the environment for northern communities.”
Jim Payne,
President & CEO of dynaCERT, states,
“We are very pleased to work with NTPC and their communities. With Robert Maier’s
managerial and technical leadership, dynaCERT
continues to develop new applications and enter varied markets for its HG1
units, not just in trucking but also in remote location power generation. Our
engineering creativity, supported by our ongoing commitment to R&D, is
rapidly advancing our Company in the diverse world of diesel uses in
furtherance of our corporate strategy.”
About dynaCERT Inc.
dynaCERT Inc. manufactures,
distributes, and installs Carbon Emission Reduction Technology for use with internal combustion engines. The
HydraGEN™ technology is for use on any diesel -powered equipment such as
transport trucks, stationary generators, refrigeration trailers, off-road
construction equipment. Fuel savings of up to 19%, emission reductions of up to
40% and exhaust particulate reduction of up to 65% were verified through
accredited third party testing. More information can be found at www.dynaCERT.com.
READER ADVISORY
Except for statements of historical fact, this
news release contains certain "forward-looking information" within
the meaning of applicable securities law. Forward-looking information is
frequently characterized by words such as "plan", "expect",
"project", "intend", "believe",
"anticipate", "estimate" and other similar words, or
statements that certain events or conditions "may" or "will"
occur. In particular, forward-looking information in this press release includes,
but is not limited to periodic updates of results, testing programs and
results, negotiations with third parties concerning potential business
transactions, and the timing of certain going forward projects. Although we
believe that the expectations reflected in the forward-looking information are
reasonable, there can be no assurance that such expectations will prove to be
correct. We cannot guarantee future results, performance or achievements.
Consequently, there is no representation that the actual results achieved will
be the same, in whole or in part, as those set out in the forward-looking
information.
Forward-looking information is based on the
opinions and estimates of management at the date the statements are made, and
are subject to a variety of risks and uncertainties and other factors that
could cause actual events or results to differ materially from those
anticipated in the forward-looking information. Some of the risks and other
factors that could cause the results to differ materially from those expressed
in the forward-looking information include, but are not limited to: uncertainty
as to whether our strategies and business plans will yield the expected
benefits; availability and cost of capital; the ability to identify and develop
and achieve commercial success for new products and technologies; the level of
expenditures necessary to maintain and improve the quality of products and
services; changes in technology and changes in laws and regulations; the
uncertainty of the emerging hydrogen economy; including the hydrogen economy
moving at a pace not anticipated; our ability to secure and maintain strategic
relationships and distribution agreements; and the other risk factors disclosed
under our profile on SEDAR at www.sedar.com. Readers are cautioned that this list of risk
factors should not be construed as exhaustive.
The forward-looking information contained in
this news release is expressly qualified by this cautionary statement. We
undertake no duty to update any of the forward -looking information to conform
such information to actual results or to changes in our expectations except as
otherwise required by applicable securities legislation. Readers are cautioned
not to place undue reliance on forward-looking information.
Neither
TSX Venture Exchange nor its Regulation Services Provider (as that term is
defined in the policies of the TSX Venture Exchange) accepts responsibility for
the adequacy or accuracy of the release.
On Behalf
of the Board
Murray
James Payne, CEO
For more
information, please contact:
Jim Payne,
CEO & President
dynaCERT Inc.
#101 – 501
Alliance Avenue
Toronto,
Ontario M6N 2J1
(416) 766-9691
x 2 [email protected]
Investor
Relations
dynaCERT Inc.
Nancy
Massicotte
(416) 766-9691 x 1
[email protected]